The Design of a Hockey Pitch

Designs of a Hockey Pitch

When creating the perfect design of a hockey pitch, many people choose to have artificial grass installed. This offers great playing qualities along with durability and all weather characteristics. A number of specifications can be used to ensure that each facility is performing

Sand-filled 2G sports fields are good for a variety of sporting activities, and they are often used for playing hockey. A number of institutions such as sports clubs, colleges and schools will have sand-filled 2G pitches constructed. The artificial grass surfacing can be used to replace dirty turf, and that leads to a completely new appearance for the pitch.

Installing Synthetic Sports Pitches

Groundworks are usually installed as the first stage in a hockey pitch construction project. To have the most suitable base, sizes need to be considered. Sub-bases tend to be installed and so the surfacing is smooth, permeable and durable once the building is complete.

A shock-pad can often be added to 2G pitches. The installation of a shock-pad also helps to reduce personal injury caused to muscles and joints to participants who will be using the area. Artificial sport pitches could be used all year long because they are porous and don’t hold water or flood. This is a great feature in comparison the natural grass because it means games won’t have to be called off due to poor weather.

Features of a Hockey Surface

2G sand-dressed surfaces are most frequently used for hockey surfaces. A sand infill layer enables balls to roll well and also will keep the turf in place. Additional grip is provided as a consequence of sand, the infill also makes certain that the fibres remain upright, enhancing the performance qualities of the surface. This is particularly important in schools and clubs where the facilities will probably be used for training and competitive matches between different teams.

If you would like to improve your hockey facility and add more features, we recommend apply line-markings. Line-markings can be applied in various colours in order to make the surfacing custom made. A number of different sports markings for different sports activities may be applied, generating a multi-use games area, where many activities could be performed in a single space.

Sand Dressed Carpet Specifications

Sand dressed pitches are actually hard wearing and even resilient, while providing excellent playing properties. This is important when thinking about the design of a hockey pitch, to make sure you get the best quality product. Sand infill helps keep the grass strands in position and enhances the playing properties. Looking after your sand dressed sports pitch is crucial so that the sand infill levels continue to be topped up often.

Synthetic Hockey Pitch Facility

By simply carrying out routine maintenance to the 2G pitch the safety and also performance characteristics may be improved upon. Contaminants may be taken off through brushing plus scrubbing. Restoration may be done for those surfaces that may have become contaminated. This procedure is done by getting rid of dirty infill and replacing it with a fresh new layer.

How to Play Hockey

how to play hockey

One of the first things you should master when you learn how to play hockey is how to tape your hockey stick. Although it can be done a few different ways and once you play more you might find a better way to do it but there are a few basic things to remember when you tape your stick.

When you tape the butt end of you stick the first thing you need to do is to determine if you like to have a knob at the tip of the stick and what size. The size of the knob is personal preference and up to each individual player.

To make a knob at the tip of the hockey stick you need to take some hockey tape and wrap it at the top of the stick to make a knob. Wrap it more times for a larger knob and fewer times for a smaller knob. Once you get the knob to the size you like without breaking the tape roll out about one foot of tape. With the sticky side facing out roll the tape into a small rope and then surround it around the stick in a spiral fashion about 1 inch apart. This will form a rib along the shaft. If you need it to go farther down the shaft pull out more tape, roll it and wrap it some more. The ribs will form a grip and traction for you when you have your gloves on so it is over to you as to how long and how much space you want in between each rib. Once you finish making the ribs with the twisted tape you should then wrap tape around it covering the ribs and tape. It may take one or two coats of tape but make sure that the tape is tight and has a good bond to the stick.

Now that you are done with the butt end of the stick it is time to move on to the blade.

In the first place, you have to remove a 8-inch bit of tape and join it to the bottom of the cutting edge. It ought to be on the bottom of the sharp edge and straddle both the front and rear of the stick. This gives additional security to the bottom of the stick where it meets the ice. Next, you have to start wrapping the stick from the sharp edge to the heel covering every bit of tape as you go. The nearer the cover the more pad for the puck and the more remote the cover the less pad. In the event that you like an all the more firm surface for the puck on the stick spread the tape out. Keep in mind to ensure that you ought to apply the tape firmly and evade any wrinkles. The tape ought to end at about inch from the toe of the stick and the end of the tape ought to be on the strike side.

One trick that some players use to prolong the life of the tape is to wax the bottom and sides of the tape. This helps protect against moisture and water and help keep your tape job last.